SET-UP | Registering a New Digital Signage Device/Display

Last updated by Personalisation Hub Support

Overview

After enabling Digital Signage and configuring your device management solution, you’ll need to register each display or device with Personalisation Hub so that it can receive campaigns. This guide shows you how to register a new device/display.

Before You Begin

✅ Ensure Digital Signage is enabled for your organisation (see previous guide).

✅ Verify that your device management (MDM/CDM) has been configured to launch the PWA Kiosk Player, or you have the PWA player URL ready to enter on the device.

Step 1 — Point the Device to the Platform

1. If you’re using an MDM or CDM, drag and drop the new device into the correct organisational unit and assign the PWA Player URL, or manually enter the PWA URL into the device’s browser.
2. Power on the device and ensure it shows a registration code.

Step 2 — Open the Displays & Devices Panel

1. In Personalisation Hub, navigate to Digital Signage → Displays & Devices.
2. Select the Unassigned Devices tab (this tab appears if devices are waiting to be registered).

Step 3 — Register the Device

1. Find your device in the list. You can match it by Asset ID or the registration code shown on the device.
2. Click Register Device.
3. Enter or update the Device Name, choose the appropriate Store/Location, and select the desired Display Type.
4. Click Register Device to confirm.

Success!

Your new device is now registered and will appear in the Displays & Devices table. It’s ready to receive campaigns.

Next Steps

➡️ USE | Register a Display / Device ➡️ USE | Add a Campaign to Play on a Digital Signage Display ➡️ USE | Scheduling a Campaign